Introduction

RCA Small Wonders Camcorder cc 176 was manufactures May 1993. Use this guide to remove the control panel of the camcorder to repair or replace panel.

Remove the 5 small black screws along the edges of the control panel at the top of the device. Wedge a small flathead screwdriver around the edges of the panel. Loosen the edges of the panel until it pops away from the device.
  • Remove the 5 small black screws along the edges of the control panel at the top of the device.

  • Wedge a small flathead screwdriver around the edges of the panel. Loosen the edges of the panel until it pops away from the device.

  • Locate the blue circuit strip along the underside of the control panel and disconnect it from the inner components of the device.

  • Remove the top control panel from the device after it has been disconnected.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Allison Baudoin

Member since: 12/05/2011

401 Reputation

4 Guides authored

Team

James Madison, Team 2-1, Allen Fall 2011 Member of James Madison, Team 2-1, Allen Fall 2011

JMU-ALLEN-F11S2G1

2 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 703