Open the Quickmill 05000A fully automatic espresso machine

Step 1 Open

• Never forget to unplug the power cord!
• Remove the water tank, pulp drawer and bean container.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2




• Remove two Phillips screws at the top.
• Remove four Phillips screws from the back panel. They are very deep and you need a screwdriver with a very long shaft.
• Remove three Phillips screws from the bottom of the back panel
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Unscrew the two Phillips screws on both sides of the back.
• Then pull the back part backwards. Watch out for the power cord.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Open the front door.
• The front part is still attached with two Phillips screws. turn them out.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• The front part now only hangs with cables on the connection buttons of the control panel. In order to get better access to the brew group or the grinder, it is sufficient to push the front part forward about 10 cm. If that's not enough, you have to free the control panel.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Special thanks to these translators:

de en

100%

HelloMacOS

HelloMacOS is helping us fix the world! Want to contribute?
Start translating ›

Author

with 1 other contributor

VauWeh

Member since: 10/19/15

202,409 Reputation

246 Guides authored

Badges: 44

• 
• 
• 

+41 more badges

Team

Repair is War on Entropy Member of Repair is War on Entropy

Community

25 Members

1,103 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview