Fix Your Stuff Community Store

Quantum View 10.1 camera Replacement

What you need

  1. Quantum View 10.1 camera Replacement, Open Quantum View case: step 1, image 1 of 1

    • Start by turning the tablet over with the screen down. Carefully use a plastic opening tool to pry the cover off. Start from the corner opposite the hibernate button.

  2. Quantum View 10.1 camera Replacement, Removing the electrical tape and magnets.: step 2, image 1 of 2 Quantum View 10.1 camera Replacement, Removing the electrical tape and magnets.: step 2, image 2 of 2

    • Pick up the magnets from the bottom edge of the tablet next to the keyboard connection and put them in a place that they will not get lost. Then carefully remove all 4 strips of electrical tape.

  4. Quantum View 10.1 camera Replacement, Unhooking the battery: step 3, image 1 of 2 Quantum View 10.1 camera Replacement, Unhooking the battery: step 3, image 2 of 2

    • Using a small plastic opening tool; genteelly pull the connection off of the motherboard.

    • Remove yellow plastic and carefully pull clip away from connection.

  6. Quantum View 10.1 camera Replacement, Remove camera clip: step 5, image 1 of 2 Quantum View 10.1 camera Replacement, Remove camera clip: step 5, image 2 of 2

    • Remove yellow tape.

    • Unclip ribbon connector.

  7. Quantum View 10.1 camera Replacement, Remove camera: step 6, image 1 of 2 Quantum View 10.1 camera Replacement, Remove camera: step 6, image 2 of 2

    • Unscrew plastic camera holder using a PH00 screwdriver bit.

    • Release the plastic holder tab and remove camera.

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 146