Fix Your Stuff Community Store

Polaroid S10 Speaker Assembly Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Polaroid S10 Speaker Assembly Replacement, Removing the backcover: step 1, image 1 of 3 Polaroid S10 Speaker Assembly Replacement, Removing the backcover: step 1, image 2 of 3 Polaroid S10 Speaker Assembly Replacement, Removing the backcover: step 1, image 3 of 3

    • Place an opening pick between the volume button and the back cover.

    • More than one pick may be needed, but avoid placing more than two picks in the same space.

    • Excessive force on the pick will break the volume button.

    • Carefully remove the back cover using the metal spudger.

    • It is normal to hear a snapping noise due to the plastic tabs on the back cover.

    Edit

  3. Polaroid S10 Speaker Assembly Replacement, Speaker Assembly: step 2, image 1 of 2 Polaroid S10 Speaker Assembly Replacement, Speaker Assembly: step 2, image 2 of 2

    • Use a heavy-duty nylon spudger to remove the tape.

    • Unscrew the four 5 mm screws with the J000 screwdriver that connects the speakers.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 3 other contributors

Christofer

Member since: 03/16/15

613 Reputation

6 Guides authored

Badges: 6

+3 more badges

Team

Colorado Springs, Team 1-4, May Spring 2015 Member of Colorado Springs, Team 1-4, May Spring 2015

UCCS-MAY-S15S1G4

4 Members

13 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 35