Introduction

This guide will show how to replace the motherboard in the Playstation TV.

Use the plastic spudger to pry up the bottom piece of the case to release the clips. Use the plastic spudger to pry up the bottom piece of the case to release the clips.
  • Use the plastic spudger to pry up the bottom piece of the case to release the clips.

Add Comment

Remove the four 6 mm Phillips screws. Remove the two Phillips #0 screws.
  • Remove the four 6 mm Phillips screws.

  • Remove the two Phillips #0 screws.

Add Comment

Remove the heat shield using the plastic opening tool. Slide the tool around the edges until the shield is free.
  • Remove the heat shield using the plastic opening tool.

  • Slide the tool around the edges until the shield is free.

Add Comment

Remove the last 6mm Phillips #0 screw from the motherboard. Remove the last 6mm Phillips #0 screw from the motherboard.
  • Remove the last 6mm Phillips #0 screw from the motherboard.

Add Comment

Use a plastic opening tool to pry up gently on the motherboard, and remove it. Use a plastic opening tool to pry up gently on the motherboard, and remove it.
  • Use a plastic opening tool to pry up gently on the motherboard, and remove it.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

Nick Dixon

Member since: 02/08/2016

251 Reputation

1 Guide authored

Team

IUPUI, Team 3-1, Baechle Spring 2016 Member of IUPUI, Team 3-1, Baechle Spring 2016

IUPUI-BAECHLE-S16S3G1

4 Members

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 10

Past 30 Days: 56

All Time: 778