PlayStation 4 Fan Replacement

You're viewing a previously published version of this guide. View latest version

Jun 01, 2016 - 08:55:01

Jan 25, 2023 - 01:49:26 Jan 25, 2023 - 01:48:46 Jan 25, 2023 - 01:44:59 Sep 16, 2021 - 10:02:16 Jun 17, 2021 - 04:01:16 Jun 17, 2021 - 04:01:11 Nov 06, 2020 - 10:18:50 Nov 03, 2020 - 02:35:28 Nov 03, 2020 - 09:26:48 Nov 02, 2020 - 01:16:07 Nov 02, 2020 - 01:16:05 Nov 02, 2020 - 01:15:46 Nov 02, 2020 - 01:14:51 Nov 02, 2020 - 01:13:58 Nov 02, 2020 - 01:13:26 Nov 02, 2020 - 01:12:58 Nov 02, 2020 - 01:12:29 Nov 02, 2020 - 01:12:06 Nov 02, 2020 - 01:11:36 Nov 02, 2020 - 01:11:29 Nov 02, 2020 - 01:11:09 Nov 02, 2020 - 01:08:57 Nov 02, 2020 - 01:07:35 Nov 02, 2020 - 01:07:28 Sep 11, 2017 - 12:02:17 Jun 01, 2016 - 08:55:01 May 23, 2016 - 06:31:01 Apr 11, 2016 - 10:27:22 Apr 11, 2016 - 10:26:12 Apr 17, 2015 - 12:05:54 Feb 06, 2015 - 05:52:22 Feb 06, 2015 - 05:52:06 Feb 06, 2015 - 05:51:51 Feb 06, 2015 - 05:12:51 Nov 07, 2014 - 11:19:33 Jun 03, 2014 - 03:20:15 Jun 03, 2014 - 03:20:13 Jun 02, 2014 - 11:52:35 May 19, 2014 - 05:15:32 May 19, 2014 - 05:15:26 May 18, 2014 - 03:56:31 May 18, 2014 - 03:56:16 May 18, 2014 - 03:54:24 May 18, 2014 - 03:47:44 May 18, 2014 - 03:32:33 May 18, 2014 - 03:30:56 May 18, 2014 - 03:30:01 May 18, 2014 - 03:26:23 Apr 29, 2014 - 11:52:04 Apr 29, 2014 - 11:38:13 Apr 29, 2014 - 11:28:24 Apr 29, 2014 - 11:26:18

Newer

Introduction

If your PS4 is running hard and constantly overheating and has led you to replacing the fan, follow the steps below. Be aware that any replacement or teardown beyond the hard drive voids the Sony warranty.

Removing the motherboard separates the original thermal paste between the processor and the heat sink. Before you reassemble your device, reapply a new layer of thermal paste. Follow this guide to learn how.

What you need

Video Overview

Step 1 Remove the upper case

PlayStation 4 Fan Replacement, Remove the upper case: step 1, image 1 of 2

PlayStation 4 Fan Replacement, Remove the upper case: step 1, image 2 of 2

Remove the two 9.7 mm Torx screws securing the upper case.

Step 2

PlayStation 4 Fan Replacement: step 2, image 3 of 3

Lift the upper case up and back to remove it from the PS4.
The upper case in held in place by plastic tabs on the front side. It will take significant force to separate them.

Step 3 Remove the upper EMI shield

PlayStation 4 Fan Replacement, Remove the upper EMI shield: step 3, image 1 of 2

PlayStation 4 Fan Replacement, Remove the upper EMI shield: step 3, image 2 of 2

Remove the twelve 9.7 mm Torx screws securing the upper EMI shield.

Step 4

PlayStation 4 Fan Replacement: step 4, image 3 of 3

This step shows you how to properly unscrew the pressure plate.
Remove the two 15.6 mm Phillips screws.
Gradually unscrew the pressure plate by turning each screw one half turn at a time.
Alternate between the two screws to maintain even pressure on the pressure plate.
Do not unscrew one side completely before unscrewing the other side or you may damage the processor.

Step 5

Remove the pressure plate.

Step 6

Remove the upper EMI shield.

Step 7 Remove the motherboard

PlayStation 4 Fan Replacement, Remove the motherboard: step 7, image 1 of 2

PlayStation 4 Fan Replacement, Remove the motherboard: step 7, image 2 of 2

Insert the flat end of a spudger in between the fan cable and the motherboard.
Twist the spudger to lift the connector straight up and disconnect it from the motherboard.

Step 8

Grab the edge of the motherboard on the front of the PS4.
Lift the motherboard until the USB ports clear the PS4 case.

Step 9

PlayStation 4 Fan Replacement: step 9, image 3 of 3

Lift the motherboard out from the PS4.
Apply a new layer of thermal paste to the processor before installing a motherboard using this guide.
Failure to properly install new thermal paste will cause your PS4 to overheat.
Insert the I/O side of the Motherboard in first, then lower the other side in.