PlayStation 2 Top Cover Replacement

Step 1 Top Cover




• Flip the PlayStation 2 over so it lays with the bottom of the device facing upwards.
• Use the flat edge of a metal spudger to pry the eight flat screw covers out.
• Remove the following eight screws securing the top cover to the bottom case:
• Four 55.4 mm Philips screws
• Four 18.0 mm Phillips screws
Step 2

• Some models have a different number of screws and feet. Remove all the feet and screws in the bottom of the case.
• The 10 screw model has 6 screws in the bottom-most portion and 4 in the upper tray.
Step 3
• Peel the warranty sticker (located next to the main power switch) straight away from the case.
• To avoid activating the VOID that may come up, heat it carefully to remove and replace it clean
Step 4
• Flip the PlayStation 2 back to its original upside position.
• Lift the top cover off the bottom case.
• To facilitate the removal, it is recommended to pry open the half closer to the power switch first while rocking the top cover towards the front of the bottom case.
• Carefully remove the power cord that attaches the top and bottom halves by disconnecting the power cord assembly from the bottom case.

Author

with 12 other contributors

jwyoung

Member since: 11/04/09

2,809 Reputation

5 Guides authored

Badges: 15

• 
• 
• 

+12 more badges

Team

Cal Poly, Team 19-1, Maness Fall 2009 Member of Cal Poly, Team 19-1, Maness Fall 2009

CPSU-MANESS-F09S19G1

4 Members

34 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview