Introduction

The base unit and headset are synchronized together when you bought them. So if you want to use a replacement headset with the base unit (or if you lose your connection to the base unit) you will need to follow these steps to synchronize the headset to the base:

Ensure the headset is in the base's cradle.
  • Ensure the headset is in the base's cradle.

Add Comment

Press the volume control buttons on the back of the base until the front of the base flashes red.
  • Press the volume control buttons on the back of the base until the front of the base flashes red.

Add Comment

Black Friday
Broken doesn't stand a chance.
Press the mute switch on top of the headset until the green light on the headset turns on.
  • Press the mute switch on top of the headset until the green light on the headset turns on.

Add Comment

Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord. Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.
  • Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.

Add Comment

When the flashing red light becomes solid, synchronization is complete.
  • When the flashing red light becomes solid, synchronization is complete.

Add Comment

Finish Line

2 other people completed this guide.

Joe

Member since: 04/12/2012

63 Reputation

3 Guides authored

Team

Cal Poly, Team 17-29, Amido Spring 2012 Member of Cal Poly, Team 17-29, Amido Spring 2012

CPSU-AMIDO-S12S17G29

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 7

All Time: 1,587