Introduction
Fixing the ON/OFF Button. After some years in use toothbrush is not turning on at all or only if the button is pressed very hard.
What you need
-
-
Gently remove the rubber-button with a small screwdriver and place a small drop of hotglue on the rubber. Let the glue cool down and put the rubber back in place.
-
-
Almost done!
Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.
Conclusion
Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.
Cancel: I did not complete this guide.
2 other people completed this guide.
