Petzl E03 050 Headlamp Lens Piece Replacement

Introduction

Does your headlamp produce dim lighting despite a fresh set of batteries and a bulb? You may need to replace the lens piece - especially if the reflective mirror has become damaged or dull.

What you need

Step 1 Extend the Damaged Lens Piece

Petzl E03 050 Headlamp Lens Piece Replacement, Extend the Damaged Lens Piece: step 1, image 1 of 1

Remove the damaged lens piece by rotating the lens piece counterclockwise (left) until the lens piece is fully extended.

Edit

Step 2 Remove the Lens Piece

Petzl E03 050 Headlamp Lens Piece Replacement, Remove the Lens Piece: step 2, image 1 of 1

Remove the extended lens piece by firmly pulling the lens piece away from the battery housing. Take care to properly dispose of the damaged lens piece.

Edit

Step 3 Attach the New Lens Piece

Petzl E03 050 Headlamp Lens Piece Replacement, Attach the New Lens Piece: step 3, image 1 of 1

Attach the new lens piece by firmly pressing the open end of the lens piece onto the battery housing.

Edit

Step 4 Secure the New Lens Piece

Petzl E03 050 Headlamp Lens Piece Replacement, Secure the New Lens Piece: step 4, image 1 of 1

Secure the new lens piece onto the battery housing by turning the lens piece clockwise (right) until the headlamp turns on. You have just successfully replaced the lens piece.

Edit