Introduction

This guide detail the replacement of the rudder on the Parrot Hydrofoil Orak. You may need to use this guide if you have a damaged rudder or if the boat is not traveling straight through the water.

Parts

No parts required.

Place the boat so that the front faces to the right.
  • Place the boat so that the front faces to the right.

Add Comment

Remove the far left 1cm screw using a T8 screwdriver. Remove the far left 1cm screw using a T8 screwdriver.
  • Remove the far left 1cm screw using a T8 screwdriver.

Add Comment

Remove the rudder.
  • Remove the rudder.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Justin Connerly

Member since: 10/06/2016

273 Reputation

2 Guides authored

Team

Cal Poly, Team 20-2, Livingston Fall 2016 Member of Cal Poly, Team 20-2, Livingston Fall 2016

CPSU-LIVINGSTON-F16S20G2

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 55