Fix Your Stuff Community Store

Panasonic SDR H-100 Rear Cover Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Panasonic SDR H-100 Rear Cover Replacement, Rear Cover: step 1, image 1 of 1

    • Unscrew the two black 4 mm screws from metal casing around the motherboard.

    Edit

  3. Panasonic SDR H-100 Rear Cover Replacement: step 2, image 1 of 2 Panasonic SDR H-100 Rear Cover Replacement: step 2, image 2 of 2

    • Remove the black 4 mm screw from the back of the camcorder underneath where the battery would have been.

    Edit

  4. Panasonic SDR H-100 Rear Cover Replacement: step 3, image 1 of 3 Panasonic SDR H-100 Rear Cover Replacement: step 3, image 2 of 3 Panasonic SDR H-100 Rear Cover Replacement: step 3, image 3 of 3

    • Pull the plastic cover on the back out and up slightly until the back feels like it’s free, then pull back on the plastic (The top cover piece and back will be detached).

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 24