Panasonic Camera DMC FX37 Battery Door Replacement

You're viewing a previously published version of this guide. View latest version

Aug 02, 2019 - 03:32:21

Aug 02, 2019 - 03:32:21 May 04, 2018 - 04:11:55 May 04, 2018 - 04:11:54 May 04, 2018 - 04:11:47 May 04, 2018 - 04:11:17 Mar 29, 2018 - 02:59:51 Mar 27, 2018 - 10:23:21 Mar 27, 2018 - 09:50:33 Mar 27, 2018 - 09:48:34 Mar 27, 2018 - 09:48:22 Mar 26, 2018 - 11:46:17 Mar 26, 2018 - 11:45:21 Mar 26, 2018 - 11:44:29 Mar 26, 2018 - 11:42:11 Mar 26, 2018 - 11:40:39 Mar 26, 2018 - 10:07:28 Mar 21, 2018 - 08:55:45 Mar 21, 2018 - 08:55:31 Mar 21, 2018 - 08:55:27 Mar 21, 2018 - 08:55:22 Mar 21, 2018 - 08:55:03 Mar 15, 2018 - 02:23:33 Mar 15, 2018 - 02:17:12 Mar 15, 2018 - 02:15:33 Mar 15, 2018 - 02:12:44 Mar 15, 2018 - 02:08:06 Mar 15, 2018 - 02:04:48

Newer

Introduction

This guide will show you how to replace the door covering the battery compartment. Overall this guide does not take much knowledge regarding disassembly, however you should take care to remember how the parts are situated before removing them.

What you need

Step 1 Battery Door

Panasonic Camera DMC FX37 Battery Door Replacement, Battery Door: step 1, image 1 of 2

Panasonic Camera DMC FX37 Battery Door Replacement, Battery Door: step 1, image 2 of 2

Set the switch on the battery door to "open," and open the door.

Step 2

At the left hand side, locate the head of the metal bar that holds the spring in place.

Step 3

Push the metal bar down using the metal tweezers.

Step 4

Pull the metal bar that holds the spring in place out.
You can also use tweezers for this step, although we found it easier to just use our fingers.

Step 5

Remove the battery access door from the device.
In order to keep the "springiness" of the door, be sure that the long arm of the spring is not over the hole for the battery.