Parts

No parts required.

Lift the flap on the Palm Zire M150 to see the back and all of the screws. Lift the flap on the Palm Zire M150 to see the back and all of the screws.
  • Lift the flap on the Palm Zire M150 to see the back and all of the screws.

Add Comment

Use the T6 bit screw driver, and carefully remove the screws at the top of the device.
  • Use the T6 bit screw driver, and carefully remove the screws at the top of the device.

Add Comment

Turn the device over with the screen facing up. Gently pull the top and bottom cover from the device, as shown in the second photo.
  • Turn the device over with the screen facing up. Gently pull the top and bottom cover from the device, as shown in the second photo.

Add Comment

Carefully lift the screen from the device, and replace it with a new one. Carefully lift the screen from the device, and replace it with a new one.
  • Carefully lift the screen from the device, and replace it with a new one.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kate

Member since: 01/26/2016

528 Reputation

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 117