Skip to main content

Pacific Image Electronics CS3600 Motor Replacement

What you need

  1. Pacific Image Electronics CS3600 Motor Replacement, Motor: step 1, image 1 of 2 Pacific Image Electronics CS3600 Motor Replacement, Motor: step 1, image 2 of 2
    • To start, open the device by removing the 5, 5mm x 9mm screws, with a Phillips J1 screwdriver.

  2. Pacific Image Electronics CS3600 Motor Replacement: step 2, image 1 of 1
    • Next, remove the 5 9mm x 5mm screws from the circled spots with a Phillips J1 screwdriver.

  3. Pacific Image Electronics CS3600 Motor Replacement: step 3, image 1 of 1
    • Once the screws are removed, carefully lift the motor casing out of the device.

    • The plastic piece circled acts as a clamp, lift the casing up and towards you to detach the casing.

  4. Pacific Image Electronics CS3600 Motor Replacement: step 4, image 1 of 2 Pacific Image Electronics CS3600 Motor Replacement: step 4, image 2 of 2
    • Now, with the motor casing in hand, remove the two 9mm x 5mm screw and washer at the top of the motor casing using a J1 screwdriver.

    • Gently pull the motor away from the casing to expose the wires.

  5. Pacific Image Electronics CS3600 Motor Replacement: step 5, image 1 of 1
    • Carefully desolder the wires from their contact point on the circuit board.

    • You have now successfully removed the motor!

Alessia Carlton

Member since: 03/21/17

201 Reputation

2 Guides authored

Team

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 4

All Time: 219