Oregon Scientific Meep! 4.0 Screen Replacement

Step 1 Oregon Scientific Meep! 4.0 Disassembly

• Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.
Step 2

• Use a plastic opening tool to detach the clips on the inside of the device.
Step 3 Screen
• Remove the black tape holding the battery in place.
Step 4
• Use a spudger to separate the battery from its adhesive.
Step 5
• Use a screwdriver to unscrew the three 4.0 mm Philips #00 screws holding the motherboard in place.
Step 6
• Use a plastic opening tool and place the tip in between the white and black pieces holding in the ribbon cable in to release the three ribbon cables around the motherboard.
Step 7
• Remove the motherboard and unscrew the twelve 7.0 Phillips #00 screws holding the metal casing around the screen in.
Step 8
• Use a plastic opening tool to undo the metal clips holding the screen in place.
Step 9
• Remove the plastic over the screen and use a spudger or plastic opening tool to remove the screen from the sticky adhesive.

Author

with 3 other contributors

Lauren Milici

Member since: 09/21/15

216 Reputation

2 Guides authored

Badges: 7

• 
• 
• 

+4 more badges

Team

University of Tampa, Team 1-3, Whiteside Fall 2015 Member of University of Tampa, Team 1-3, Whiteside Fall 2015

UT-WHITESIDE-F15S1G3

3 Members

12 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview