Fix Your Stuff Community Store

One Education Infinity:One Keyboard Frame Prerequisite

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

This guide is a prerequisite for the One Education Infinity:One keyboard and touchpad replacement guides.

What you need

  1. One Education Infinity:One Keyboard Frame Prerequisite, Back Case: step 1, image 1 of 2 One Education Infinity:One Keyboard Frame Prerequisite, Back Case: step 1, image 2 of 2

    • Use a spudger to pry the four rubber pads away from the bottom of the case.

    • Use a Phillips #00 screwdriver to unscrew the four 6.4 mm screws.

    Edit

  2. One Education Infinity:One Keyboard Frame Prerequisite: step 2, image 1 of 2 One Education Infinity:One Keyboard Frame Prerequisite: step 2, image 2 of 2

    • Insert a Jimmy or other prying tool into the seam on the edge of the casing.

    • Trace along the edges of the device until all clips are released.

    • Lift the back case away from the device.

    Edit

  3. One Education Infinity:One Keyboard Frame Prerequisite: step 3, image 1 of 1

    • Use a Phillips #00 screwdriver to unscrew the four 6.4mm screws on the hinge mounts.

    Edit

  4. One Education Infinity:One Keyboard Frame Prerequisite: step 4, image 1 of 2 One Education Infinity:One Keyboard Frame Prerequisite: step 4, image 2 of 2

    • Use tweezers to lift the fabric cover and hinge connector away from the daughterboard.

    • Always use ESD safe tools when working with delicate electrical components.

    Edit

  6. One Education Infinity:One Keyboard Frame Prerequisite, Daughterboard: step 5, image 1 of 2 One Education Infinity:One Keyboard Frame Prerequisite, Daughterboard: step 5, image 2 of 2

    • Flip up the black retaining flap on the ZIF connector holding the large grey ribbon cable in place.

    • Pull the ribbon cable straight out of the ZIF connector.

    Edit

  7. One Education Infinity:One Keyboard Frame Prerequisite: step 6, image 1 of 2 One Education Infinity:One Keyboard Frame Prerequisite: step 6, image 2 of 2

    • Use the flat end of a spudger to flip up the black tab on the smaller ZIF connector.

    • Use tweezers to pull the ribbon cable straight out of the connector.

    Edit

  8. One Education Infinity:One Keyboard Frame Prerequisite: step 7, image 1 of 3 One Education Infinity:One Keyboard Frame Prerequisite: step 7, image 2 of 3 One Education Infinity:One Keyboard Frame Prerequisite: step 7, image 3 of 3

    • Use a Phillips #000 screwdriver to unscrew the three 3.4mm screws.

    • Lift the daughterboard away from the device to remove.

    Edit

  9. One Education Infinity:One Keyboard Frame Prerequisite, Keyboard Frame Prerequisite: step 8, image 1 of 2 One Education Infinity:One Keyboard Frame Prerequisite, Keyboard Frame Prerequisite: step 8, image 2 of 2

    • Use a spudger to lift up the black retaining flap on the touchpad's ZIF connector.

    • Pull the ribbon cable straight back to remove.

    Edit

  10. One Education Infinity:One Keyboard Frame Prerequisite: step 9, image 1 of 1

    • Use a Phillips #00 screwdriver to unscrew the four 6.4mm screws holding the touchpad in place.

    Edit

  11. One Education Infinity:One Keyboard Frame Prerequisite: step 10, image 1 of 2 One Education Infinity:One Keyboard Frame Prerequisite: step 10, image 2 of 2

    • Feed the ribbon cable through the hole in the metal frame.

    • Left the metal frame away from the device.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Taylor Bratsch

Member since: 09/06/16

5,742 Reputation

14 Guides authored

Badges: 32

+29 more badges

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 70