Introduction

In the One Education Infinity:One laptop, the front and rear facing cameras are one component. If you are experiencing performance issues with either camera this guide will help you replace them.

Use a spudger to disconnect the black bundled cable connector from the motherboard. Use a spudger to disconnect the black bundled cable connector from the motherboard.
  • Use a spudger to disconnect the black bundled cable connector from the motherboard.

Add Comment

Use a spudger to lift the black tab on top of the ZIF connector. Slide the ribbon cable out of the connector. Slide the ribbon cable out of the connector.
  • Use a spudger to lift the black tab on top of the ZIF connector.

  • Slide the ribbon cable out of the connector.

Add Comment

Use a spudger to flip up the black retaining flap on the ZIF connector. Pull the folded ribbon cable straight out of the connector. This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.
  • Use a spudger to flip up the black retaining flap on the ZIF connector.

  • Pull the folded ribbon cable straight out of the connector.

  • This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

Add Comment

Use a spudger to pry the battery away from the device.
  • Use a spudger to pry the battery away from the device.

  • Always use ESD safe tools when working with delicate electrical components.

Add Comment

Use a spudger to flip up the black flap on the camera's  ZIF connector. Pull the ribbon cable straight out of the connector. Pull the ribbon cable straight out of the connector.
  • Use a spudger to flip up the black flap on the camera's ZIF connector.

  • Pull the ribbon cable straight out of the connector.

Add Comment

Use tweezers to remove the black cushion surrounding the camera lens. Use tweezers to remove the black cushion surrounding the camera lens.
  • Use tweezers to remove the black cushion surrounding the camera lens.

Add Comment

Use tweezers to lift the camera assembly away from the device. Lift straight up to avoid tearing the delicate ribbon cable on the retaining wall.
  • Use tweezers to lift the camera assembly away from the device.

  • Lift straight up to avoid tearing the delicate ribbon cable on the retaining wall.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Taylor Bratsch

Member since: 09/06/2016

2,082 Reputation

14 Guides authored

Team

iFixit Member of iFixit

Community

130 Members

6,632 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 48