Skip to main content

One Education Infinity:One Antenna Prerequisite

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. One Education Infinity:One Antenna Prerequisite, Battery: step 1, image 1 of 2 One Education Infinity:One Antenna Prerequisite, Battery: step 1, image 2 of 2
    • Use a spudger to disconnect the black bundled cable connector from the motherboard.

  2. One Education Infinity:One Antenna Prerequisite: step 2, image 1 of 3 One Education Infinity:One Antenna Prerequisite: step 2, image 2 of 3 One Education Infinity:One Antenna Prerequisite: step 2, image 3 of 3
    • Use a spudger to lift the black tab on top of the ZIF connector.

    • Slide the ribbon cable out of the connector.

  3. One Education Infinity:One Antenna Prerequisite: step 3, image 1 of 3 One Education Infinity:One Antenna Prerequisite: step 3, image 2 of 3 One Education Infinity:One Antenna Prerequisite: step 3, image 3 of 3
    • Use a spudger to flip up the black retaining flap on the ZIF connector.

    • Pull the folded ribbon cable straight out of the connector.

    • This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

  4. One Education Infinity:One Antenna Prerequisite: step 4, image 1 of 1
    • Use a spudger to pry the battery away from the device.

    • Always use ESD safe tools when working with delicate electrical components.

  5. One Education Infinity:One Antenna Prerequisite, Antenna: step 5, image 1 of 2 One Education Infinity:One Antenna Prerequisite, Antenna: step 5, image 2 of 2
    • Use ESD safe tweezers to disconnect the antenna from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Taylor Bratsch

Member since: 09/06/16

5,742 Reputation

14 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 45