Fix Your Stuff Community Store

Onda V701 Screen Replacement

Introduction

This guide will allow you to remove the screen from the inside of the device in order to clean it or replace it. The screen on a device can easily crack. This repair is easy to do and does not require any special tools.

What you need

  1. Onda V701 Screen Replacement, Back Panel: step 1, image 1 of 3 Onda V701 Screen Replacement, Back Panel: step 1, image 2 of 3 Onda V701 Screen Replacement, Back Panel: step 1, image 3 of 3

    • Ensure device is powered off before disassembly.

    • Remove the 4 rubber screw plugs using a spudger.

    Edit

  2. Onda V701 Screen Replacement: step 2, image 1 of 3 Onda V701 Screen Replacement: step 2, image 2 of 3 Onda V701 Screen Replacement: step 2, image 3 of 3

    • Remove the four 4.8mm mounting screws using a PH00 screwdriver.

    Edit

  3. Onda V701 Screen Replacement: step 3, image 1 of 2 Onda V701 Screen Replacement: step 3, image 2 of 2

    • Starting at one corner, gently pry the back panel assembly from the screen assembly using two plastic opening tools.

    • Slide the opening tools around the perimeter of the device to separate the back panel assembly from the screen assembly.

    Edit

  5. Onda V701 Screen Replacement: step 4, image 1 of 2 Onda V701 Screen Replacement: step 4, image 2 of 2

    • Gently lift the screen assembly away from the back cover assembly.

    • Be careful when separating the two pieces as the screen assembly is still connected to the mother board by two ribbon cables.

    Edit

  6. Onda V701 Screen Replacement: step 5, image 1 of 3 Onda V701 Screen Replacement: step 5, image 2 of 3 Onda V701 Screen Replacement: step 5, image 3 of 3

    • Disconnect the two ribbon connectors by flipping the gray tabs up with a fingernail or a spudger.

    • Remove the ribbon cables.

    Edit

  7. Onda V701 Screen Replacement, Screen: step 6, image 1 of 3 Onda V701 Screen Replacement, Screen: step 6, image 2 of 3 Onda V701 Screen Replacement, Screen: step 6, image 3 of 3

    • Remove all 14 of the 3.6mm screws using a PH00 screwdriver.

    Edit

  8. Onda V701 Screen Replacement: step 7, image 1 of 3 Onda V701 Screen Replacement: step 7, image 2 of 3 Onda V701 Screen Replacement: step 7, image 3 of 3

    • Gently separate the screen from the plastic border/screen holder by pulling it off with your hands.

    Edit

  9. Onda V701 Screen Replacement: step 8, image 1 of 3 Onda V701 Screen Replacement: step 8, image 2 of 3 Onda V701 Screen Replacement: step 8, image 3 of 3

    • Remove the grey monitor from the glass screen cover by gently lifting it up.

    Edit

    بدي من هي الشاشة لمس فقط وين بلاقي

    abdurrhman khrrat - Reply

    اين اجدها

    abdurrhman khrrat - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 4 other contributors

William Sioholm

Member since: 03/11/15

104 Reputation

1 Guide authored

Badges: 5

+2 more badges

Team

Colorado Springs, Team 4-6, Panko Spring 2015 Member of Colorado Springs, Team 4-6, Panko Spring 2015

UCCS-PANKO-S15S4G6

3 Members

10 Guides authored

One Comment

بدي من هي الشاشة وين بلاقي

abdurrhman khrrat - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 450