Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This guide is helpful if you need to replace an old or bad battery.

  1. Release both latches on the battery compartment on the bottom of the camera to open the door.
    • Release both latches on the battery compartment on the bottom of the camera to open the door.

  2. After you have removed the latch, open the compartment door to remove the battery.
    • After you have removed the latch, open the compartment door to remove the battery.

    • The batteries contain highly acidic contents. If the battery has leaked or ruptured while inside the compartment, there may be damage to the camera's circuitry. Carefully clean out any residue from the battery using latex gloves and tissues.

    • If the compartment door is loose, check the hinge or the locking pieces under the rubber pad. To do this, unscrew and remove the rubber and metal plate on the door.

Richard Yacobellis

Member since: 01/21/2015

213 Reputation

2 Guides authored

Team

USF Tampa, Team 4-6, Brown Winter 2015 Member of USF Tampa, Team 4-6, Brown Winter 2015

USFT-BROWN-W15S4G6

4 Members

12 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 617