Fix Your Stuff Community Store

Olympus SZ-12 Back Case Replacement

Introduction

You will need a clean, well-lit area, an iFixit repair kit including the specialized screw driver, along with the Phillips #000 bit. We also recommend you have an organization tray in order to keep track of all the screws you will be taking out.

What you need

  1. Olympus SZ-12 Back Case Replacement, Back Case: step 1, image 1 of 2 Olympus SZ-12 Back Case Replacement, Back Case: step 1, image 2 of 2

    • Remove nine 4.45mm Phillips #000 screws from the outside of the case.

  2. Olympus SZ-12 Back Case Replacement: step 2, image 1 of 1

    • There are four screws to take out on the bottom of the camera.

  4. Olympus SZ-12 Back Case Replacement: step 3, image 1 of 1

    • There are three screws to take out on this side.

  5. Olympus SZ-12 Back Case Replacement: step 4, image 1 of 1

    • There is one screw to take out on this side.

  6. Olympus SZ-12 Back Case Replacement: step 5, image 1 of 1

    • There is one hidden screw inside the HDMI port.

  7. Olympus SZ-12 Back Case Replacement: step 6, image 1 of 1

    • Using the blue plastic opening tool, wedge open and remove the case.

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 474