Introduction

Step by step instructions to clean or replace the control buttons on the camera.

  1. Before disassembling your camera, be sure it is powered off.
    • Before disassembling your camera, be sure it is powered off.

    • Remove two screws from the video port located at the side panel of the camera.

    • Remove three screws from the bottom panel of the camera.

  2. Open the USB port cover, and remove three screws from inside.
    • Open the USB port cover, and remove three screws from inside.

    • Next, open the memory slot cover and remove the screw.

    • Use the blue opening tool to loosen and separate the back cover from the camera.

    • Locate and unscrew the three screws inside the back cover body (picture 3) .

    • Remove button pad assembly from the back cover.

    • The button assembly is now separate from the back cover.

    • Inspect for broken areas. Replace or clean the button parts.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

GradStudents2011

Member since: 09/08/2011

21 Reputation

3 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 2

All Time: 722