Skip to main content

OLPC XO-1.5 Screen Replacement

What you need

  1. OLPC XO-1.5 Screen Replacement, Battery: step 1, image 1 of 1
    • Place the laptop upside down with the handle away from you.

  2. OLPC XO-1.5 Screen Replacement: step 2, image 1 of 1
    • Slide the tabs out, towards the green edges, to show the open lock symbol.

    • The right tab will stay in place, but the left tab must be held in position while you remove the battery.

  3. OLPC XO-1.5 Screen Replacement: step 3, image 1 of 3 OLPC XO-1.5 Screen Replacement: step 3, image 2 of 3 OLPC XO-1.5 Screen Replacement: step 3, image 3 of 3
    • Lift the middle of the battery to remove it.

  4. OLPC XO-1.5 Screen Replacement, Screen: step 4, image 1 of 3 OLPC XO-1.5 Screen Replacement, Screen: step 4, image 2 of 3 OLPC XO-1.5 Screen Replacement, Screen: step 4, image 3 of 3
    • Turn the laptop so it is resting on its bottom.

    • Open the laptop by rotating the green wings on the side up, then lifting the top half of the laptop.

    • Rotate the top half of the laptop about 90 degrees.

  5. OLPC XO-1.5 Screen Replacement: step 5, image 1 of 2 OLPC XO-1.5 Screen Replacement: step 5, image 2 of 2
    • Turn the laptop upside down, so you can see the screws on the bottom of the top half.

    • Remove the two 4mm screws with a Phillips #1 screwdriver.

    • Rotate the top half 180 degrees.

    • Remove the two 4mm screws with a Phillips #1 screwdriver.

  6. OLPC XO-1.5 Screen Replacement: step 6, image 1 of 1
    • Rotate the top of the laptop 90 degrees, so that it is facing you again.

    • Slide the green pieces off the device. They should come off easily.

  7. OLPC XO-1.5 Screen Replacement: step 7, image 1 of 3 OLPC XO-1.5 Screen Replacement: step 7, image 2 of 3 OLPC XO-1.5 Screen Replacement: step 7, image 3 of 3
    • Pull down on the white screen cover. It does not require much force.

    • Remove the screen cover.

    • The game pad on the left sometimes falls during this step.

  8. OLPC XO-1.5 Screen Replacement: step 8, image 1 of 2 OLPC XO-1.5 Screen Replacement: step 8, image 2 of 2
    • Unscrew the four 7.62mm Phillips #1 screws on either side of the screen.

    • The screen is still connected by ribbon cables. You can damage the cables if you remove the screen before disconnecting the cables.

    • Move the screen down a little to expose the ribbon cables.

  9. OLPC XO-1.5 Screen Replacement: step 9, image 1 of 3 OLPC XO-1.5 Screen Replacement: step 9, image 2 of 3 OLPC XO-1.5 Screen Replacement: step 9, image 3 of 3
    • Flip up the tab right under the middle top of the screen.

    • Pull the black ribbon cable out of the socket.

  10. OLPC XO-1.5 Screen Replacement: step 10, image 1 of 2 OLPC XO-1.5 Screen Replacement: step 10, image 2 of 2
    • Flip up the smaller tab under the left side of the screen.

    • Remove the small cable to separate the screen from the rest of the laptop.

    • Gently remove the screen.

Andrew Ferrell

Member since: 10/05/12

27 Reputation

1 Guide authored

Team

Cal Poly, Team 3-19, Amido Fall 2012 Member of Cal Poly, Team 3-19, Amido Fall 2012

CPSU-AMIDO-F12S3G19

6 Members

10 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 16

All Time: 2,282