Introduction

Power cords can be damaged over time due to various causes. This guide will demonstrate how to replace the power cord.

  1. Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws). 2 of the screws will be star shaped rather than phillips head.
    • Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws).

    • 2 of the screws will be star shaped rather than phillips head.

    • Remove the base plate.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Identify the red and black wires topped with white-clear caps. Use pliers to squeeze the flattened part of both caps.
    • Identify the red and black wires topped with white-clear caps.

    • Use pliers to squeeze the flattened part of both caps.

    • The black and red wires attached to the power cord should be loose and ready to pull out.

  4. Replace the cord by slipping the new cord's black and red wires into the caps.
    • Replace the cord by slipping the new cord's black and red wires into the caps.

    • Pinch the middle of the cap back to the flattened position using the pliers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Allie Decker

Member since: 09/26/2017

125 Reputation

1 Guide authored

Team

Cal Poly, Team S7-G1, Banghart Fall 2017 Member of Cal Poly, Team S7-G1, Banghart Fall 2017

CPSU-BANGHART-F17S7G1

5 Members

6 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 41

All Time: 340