Nutri Ninja Ninja Blender Duo BL641 Body Disassembly

Step 1 Nutri Ninja Ninja Blender Duo BL641 Body Disassembly

• Turn blender upside down
Step 2



• Remove these six screws (0.5 inch 5 gauge phillip's head)
• Note: 2 of the screws will be star shaped circled in blue
• Lift the bottom panel off
Step 3
• Unscrew and remove these six phillip's screws. (0.5 inch 5 gauge phillips)
• Note: The screws circled in blue are 1/8" longer and have a slightly different top than the rest. These are the only two screws that are different than the rest.
Step 4
• Insert pry tool in between the two plastic pieces to separate them
• Move pry tool back and forth from right to left until the two pieces begin to separate as shown.
• Pry the two pieces apart with your hands as shown in the picture to finish separating the pieces.
Step 5
• This completes the disassembly of the main body of the blender so you can continue to perform replacements on the internal parts.

Author

with 3 other contributors

Nathan

Member since: 09/26/17

201 Reputation

2 Guides authored

Badges: 3

• 
• 
• 

Team

Cal Poly, Team S7-G1, Banghart Fall 2017 Member of Cal Poly, Team S7-G1, Banghart Fall 2017

CPSU-BANGHART-F17S7G1

5 Members

6 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview