Nokia Lumia 635 Display Assembly Replacement

Step 1 BATTERY, SIM AND MEMORY CARDS




• Switch off the phone.
• Remove the battery and any installed SIM and memory cards.
• Remove the black tape near to the loudspeaker.
Step 2 SCREWS




• Remove the 9x Torx T4 screws.
• Two of them are with the same head size but with a different length.
Step 3 REAR COVER / BEZEL
• Use a plastic opening tool to remove the back cover.
• Careful unhook the display assembly flex cable.
Step 4 TESTING THE NEW SPARE PART
• Insert wisdom here.
Step 5 DISPLAY ASSEMBLY STEP 1
• Put some scotch tape to prevent the glass from scattering.
• Use a hot gun or hair dryer and warm the glass to soften the adhesive.
Step 6 DISPLAY ASSEMBLY STEP 2
• Start the separating from the upper right corner, where you have an hole in the middle frame.
• Use plastic tool to prevent the middle frame from scratches.
• Work slowly, you can cut your fingers.
Step 7 MIDDLE FRAME
• Clean the middle farme.
• Put adhesive tape 3MM.
• Be careful, don't cover the technological openings on the middle frame (for the light sensor, earpiece, etc.).
• It's easier if you order the spare part together with an adhesive tape.
• Install the display assembly.
Step 8
• That's all.
• .
• .
• .
• .
• .
• .
• Did you do it successfully?

Author

ZFix

Member since: 12/09/13

191,182 Reputation

330 Guides authored

Badges: 35

• 
• 
• 

+32 more badges

Team

Master Techs Member of Master Techs

Community

322 Members

2,520 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview