Introduction

Nokia Lumia 625 - how to remove / replace the back / rear bezel.

Turn off the phone and remove the back cover. Remove any installed SIM or memory card. Use a screwdriver Torx T5 and remove the 8x black screws.
  • Turn off the phone and remove the back cover.

  • Remove any installed SIM or memory card.

  • Use a screwdriver Torx T5 and remove the 8x black screws.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
At the top and bottom of the phone you'll see two grooves. Use a plastic tool and start the separating the rear bezel from here. Use a plastic tool and start the separating the rear bezel from here.
  • At the top and bottom of the phone you'll see two grooves.

  • Use a plastic tool and start the separating the rear bezel from here.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

ZFix

Member since: 12/09/2013

151,886 Reputation

429 Guides authored

Team

Master Techs Member of Master Techs

Community

276 Members

718 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 11

All Time: 888