Introduction

Don't forget to turn off the phone first.

When you disconnect the digitizer there is a rev number

it only works with the same rev

for example rev 1.3

Image 1/3: Take out battery Image 2/3: Take out the sim card-tray Image 3/3: Take out the sim card-tray
  • Open cover

  • Take out battery

  • Take out the sim card-tray

Add Comment

Image 1/1: 2x t5 screws (slightly shorter than the top and bottom scres).
  • 4 x t5 screws

  • 2x t5 screws (slightly shorter than the top and bottom scres).

Just a short note:

There are two different kinds of those T5 screws in your Lumia.

Remember that when reassembling your phone!

lightfox - Reply

Image 1/2: Digitizer Image 2/2: LCD
  • Disconnect connectors

    • Digitizer

    • LCD

Add Comment

Image 1/2: Image 2/2:
  • Remove main board

Add Comment

Image 1/2: Image 2/2:
  • Open the 6 clips

Add Comment

Image 1/3: Speaker Image 2/3: Front camera Image 3/3: Front camera
  • Remove

    • Speaker

    • Front camera

Add Comment

Image 1/1:
  • Remove Lcd from digitizer

Add Comment

Image 1/2: Image 2/2:
  • You are ready

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

12 other people completed this guide.

ivan coene

Member since: 03/12/2014

2,855 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 15

Past 30 Days: 79

All Time: 16,225