Introduction

Keeping your device water-proof is paramount in using it to its full potential. Follow this guide to replace the water-proofing O-ring.

Parts

No parts required.

  1. Grasp the clear cover and the white housing and twist the cover counter-clockwise.
    • Grasp the clear cover and the white housing and twist the cover counter-clockwise.

    • The lid may hold fast, but it will come off with some firm twisting.

    Add Comment

  2. Lift the lid from the device
    • Lift the lid from the device

    • It may be helpful to use a spudger to pry under the lid if there is difficulty in getting a good grip on the smooth plastic.

    Add Comment

    • Using a plastic spudger, lift the o-ring from the lid

    Add Comment

    • Gently stretch the new O-ring and place it in position on the clear cover. Make sure it is flush with the flange and not interfering with the locking threads

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Vinny Capone

Member since: 10/18/2013

549 Reputation

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 100