Fix Your Stuff Community Store

Ninja Coffee Bar® Single-Serve System Drip Stop Toggle and Brew Basket Replacement

Introduction

This guide will teach you how to replace the drip stop toggle and/or the brew basket of your Ninja Coffee Bar® Single-Serve System. In a lot of coffee machines after heavy use the brew based can start to leak, and these fixes are very similar, so that is why we did both of these fixes together. Warning: be very careful when unscrewing the brew basket because there is a small spring that releases the drip stop toggle that needs to stay in place. Also you will need a longer skinnier Phillips head screwdriver than the one in the iFixit tool kit to complete this repair.

What you need

  1. Ninja Coffee Bar® Single-Serve System Drip Stop Toggle and Brew Basket Replacement, Drip Stop Toggle and Brew Basket: step 1, image 1 of 1

    • Slide the brew baskets to the open position.

    Edit

  2. Ninja Coffee Bar® Single-Serve System Drip Stop Toggle and Brew Basket Replacement: step 2, image 1 of 1

    • Remove three 6mm screws with Phillips head screw driver.

    Edit

  4. Ninja Coffee Bar® Single-Serve System Drip Stop Toggle and Brew Basket Replacement: step 3, image 1 of 3 Ninja Coffee Bar® Single-Serve System Drip Stop Toggle and Brew Basket Replacement: step 3, image 2 of 3 Ninja Coffee Bar® Single-Serve System Drip Stop Toggle and Brew Basket Replacement: step 3, image 3 of 3

    • Using needle nose tweezers, push the bottom of the pin up from behind the brew basket

    • Pull the pin out.

    Edit

  5. Ninja Coffee Bar® Single-Serve System Drip Stop Toggle and Brew Basket Replacement: step 4, image 1 of 1

    • Remove brew basket from swinging basket holder

    Edit

  6. Ninja Coffee Bar® Single-Serve System Drip Stop Toggle and Brew Basket Replacement: step 5, image 1 of 2 Ninja Coffee Bar® Single-Serve System Drip Stop Toggle and Brew Basket Replacement: step 5, image 2 of 2

    • Use a Phillips screwdriver to remove one 6mm screw from the drip stop toggle.

    • Remove the drip stop toggle.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 3 other contributors

Naser Aldousari

Member since: 10/10/17

310 Reputation

3 Guides authored

Badges: 8

+5 more badges

Team

USF Tampa, Team S13-G69, Cagle Fall 2017 Member of USF Tampa, Team S13-G69, Cagle Fall 2017

USFT-CAGLE-F17S13G69

4 Members

3 Guides authored

3 Comments

Can you provide more detail regarding the small spring that you provide the warning for? The one that needs to stay in place. If it does fall out, how can not be fixed or rather where does not go?

Dani - Reply

Agree! The spring NEEDS to be resting vertically in between the two clips, in my case, these have worn and the spring came out of seat. It needed to be refastened and the five beeps, “of death” have disappeared and my coffeepot functions again!

Marcus Martinez - Reply

* this works on the ninja coffee bar larger system as well

Marcus Martinez -

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 10

Past 30 Days: 47

All Time: 6,936