Introduction

The user will learn how to replace the selector button set including the menu, home, and back buttons on the Nikon Coolpix S800c. This replacement may be necessary due to damage on the unit.

Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).
  • Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).

Add Comment

Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.
  • Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.

Add Comment

  • Isolate the back panel/touch screen section.

  • Using a Phillips #00 head screwdriver (found in iFixit tool kit), remove the 2 screws that secure the metal plate protecting the selector buttons.

  • Pry the small metal plate up with a plastic tool of your choice.

Add Comment

  • Remove the selector button chain by prying it up with plastic tool of your choice.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Erik Knapton

Member since: 01/30/2018

207 Reputation

2 Guides authored

Team

Baylor, Team S2-G6, Johnson Spring 2018 Member of Baylor, Team S2-G6, Johnson Spring 2018

BU-JOHNSON-S18S2G6

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 43