Introduction

If your camera won't turn on you may need to replace its batteries. The only requirement for this guide is two AA batteries.

Tools

No tools required.

Parts

Slide the battery cover to the right. The hinge is on the left side of the cover which will allow the cover to stay attached.
  • Slide the battery cover to the right.

  • The hinge is on the left side of the cover which will allow the cover to stay attached.

Add Comment

Deck the Halls
With tools and Fix Kits
Slide the second cover (yellow) to the right (similar to the outer cover). This will allow the batteries to be exposed. Slide the second cover (yellow) to the right (similar to the outer cover). This will allow the batteries to be exposed.
  • Slide the second cover (yellow) to the right (similar to the outer cover). This will allow the batteries to be exposed.

Add Comment

Remove the batteries by gently tipping the camera.
  • Remove the batteries by gently tipping the camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cassie Hamm

Member since: 01/21/2015

201 Reputation

2 Guides authored

Team

Penn State, Team 2-4, Kaschak Winter 2015 Member of Penn State, Team 2-4, Kaschak Winter 2015

PSU-KASCHAK-W15S2G4

4 Members

3 Guides authored

One Comment

Cover not sliding open. Is there a way to loosen and adjust. Need to put in new batteries.

Laurie Campbell - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 15

All Time: 365