Nikon Coolpix L610 Control Panel Replacement

Step 1 Plastic Cover



• Remove the four (3.20 mm) Phillips #00 screws at the bottom of the device.
Step 2

• Remove the top (4.10 mm) Phillips #00 screw adjacent to the battery compartment.
• Remove the bottom (3.20 mm) Phillips #00 screw adjacent to the battery compartment.
Step 3
• Remove the top (4.20 mm) Phillips #00 screw adjacent to the mic side of the camera and opposite the battery side.
• Remove the lower (3.20 mm) Phillips #00 screw adjacent to the mic side of the camera and opposite of the battery side.
Step 4
• Separate the case using the plastic prying tool. This can be done by placing the tool in the position that is shown and in the position on the left side of the camera.
Step 5 Control Panel
• Carefully unscrew and remove the top and bottom (2.25 mm) screws from the control panel.
• Carefully unscrew and remove the middle (3.20 mm) screws from the control panel.
Step 6
• Carefully remove the ribbon connecting the control panel to the camera. The latch can be removed by sliding it down and pulling the ribbon down.

Author

with 3 other contributors

Jeremy

Member since: 01/21/15

1,027 Reputation

5 Guides authored

Badges: 18

• 
• 
• 

+15 more badges

Team

USF Tampa, Team 9-4, Brown Winter 2015 Member of USF Tampa, Team 9-4, Brown Winter 2015

USFT-BROWN-W15S9G4

4 Members

12 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview