Introduction

If your camera does not power on, then most likely you would have to replace your batteries. Follow instruction on this guide to remove your old batteries and replace them.

Image 1/1: Turn the camera upside down so you can see the battery chamber.
  • Make sure to turn off your camera before replacing the batteries.

  • Turn the camera upside down so you can see the battery chamber.

Add Comment

Image 1/3: Slide the cover down to unhook the battery door. Image 2/3: The inner battery housing has orientation stickers to show the way in which the batteries should be placed. Image 3/3: The inner battery housing has orientation stickers to show the way in which the batteries should be placed.
  • Push the battery chamber lock to the right to open it.

  • Slide the cover down to unhook the battery door.

  • The inner battery housing has orientation stickers to show the way in which the batteries should be placed.

Add Comment

Image 1/1: Replace the batteries with new ones.
  • Remove the old batteries from the battery chamber.

  • Replace the batteries with new ones.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Rabiaah A

Member since: 02/09/2016

101 Reputation

1 Guide authored

Team

USF Tampa, Team 2-10, Cagle Spring 2016 Member of USF Tampa, Team 2-10, Cagle Spring 2016

USFT-CAGLE-S16S2G10

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 34

Past 30 Days: 83

All Time: 756