Introduction

Use this guide to replace the LCD.

Image 1/3: Remove the screw from the right side. Image 2/3: Remove the visible screw from the left side. Image 3/3: Remove the visible screw from the left side.
  • Clearly visible damage to the LCD. It did not even light up.

  • Remove the screw from the right side.

  • Remove the visible screw from the left side.

Add Comment

Image 1/3: Remove the three screws from the bottom. Image 2/3: Start splitting the case from the battery compartment. I used an opening tool, but fingernails will be sufficient as well. Image 3/3: Start splitting the case from the battery compartment. I used an opening tool, but fingernails will be sufficient as well.
  • Open the USB A/C cover, there is one more screw that needs to be removed. That is why it is important to always remove all covers...

  • Remove the three screws from the bottom.

  • Start splitting the case from the battery compartment. I used an opening tool, but fingernails will be sufficient as well.

Add Comment

Image 1/3: Lift the LCD out of the frame by using your fingernail or an opening tool. Do not remove it yet, it is still connected. Image 2/3: Flip the black clasp up by using fingernails or the opening tool. No big force is required. Remove the old LCD. Image 3/3: Flip the black clasp up by using fingernails or the opening tool. No big force is required. Remove the old LCD.
  • After the splitting of the case, the LCD is imediately visible.

  • Lift the LCD out of the frame by using your fingernail or an opening tool. Do not remove it yet, it is still connected.

  • Flip the black clasp up by using fingernails or the opening tool. No big force is required. Remove the old LCD.

Add Comment

Image 1/2: Reassemble in reverse order. Hopefully your results will be the same as for me. Image 2/2: Reassemble in reverse order. Hopefully your results will be the same as for me.
  • Here is the new screen, note the blue tab. This is the screen protector, remove it after installation.

  • Reassemble in reverse order. Hopefully your results will be the same as for me.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

oldturkey03

Member since: 09/29/2010

434,612 Reputation

102 Guides authored

Team

OTS Member of OTS

Business

1 Member

102 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 11

All Time: 2,084