Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

installing the battery housing

  1. Using two fingers, push up on the rear cover. Using two fingers, push up on the rear cover.
    • Using two fingers, push up on the rear cover.

  2. The rear cover slides up and off.
    • The rear cover slides up and off.

  3. Using the plastic opening tools, pry the left bottom corner of the battery up.
    • Using the plastic opening tools, pry the left bottom corner of the battery up.

  4. Pull the battery up and out.
    • Pull the battery up and out.

  5. PC Laptop Batteries

    An easy fix for a big power boost.

    Shop Now

    PC Laptop Batteries

    An easy fix for a big power boost.

    Shop Now
  6. Remove the two Torx T5 screws.
    • Remove the two Torx T5 screws.

    • Remove the one Philips #00 screw.

  7. Using the plastic opening tool, pry up the battery housing upwards. Push pry tool down, undoing the plastic tab.
    • Using the plastic opening tool, pry up the battery housing upwards.

    • Push pry tool down, undoing the plastic tab.

  8. Pry the upper left tab open on the battery housing. Pry the upper left tab open on the battery housing.
    • Pry the upper left tab open on the battery housing.

  9. Pry the top tab of the battery housing. Pry the top tab of the battery housing.
    • Pry the top tab of the battery housing.

  10. Pry the right side tab of the battery housing. Pry the right side tab of the battery housing.
    • Pry the right side tab of the battery housing.

  11. Pull up on the battery housing. Slide the battery housing out to remove it.
    • Pull up on the battery housing.

    • Slide the battery housing out to remove it.

Niklas Johnson

Member since: 01/31/2012

1,093 Reputation

18 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,474