Skip to main content

Introduction

This guide will explain how to replace both cameras in the Nextbook Flexx 10.

  1. Remove the top section by pushing the middle button in the center of the base and lift on the screen. Remove the top section by pushing the middle button in the center of the base and lift on the screen. Remove the top section by pushing the middle button in the center of the base and lift on the screen.
    • Remove the top section by pushing the middle button in the center of the base and lift on the screen.

  2. Remove the black back panel of the screen. Remove the black back panel of the screen. Remove the black back panel of the screen.
    • Remove the black back panel of the screen.

  3. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  4. Place the panel screen down. Identify the cameras at the top center.
    • Place the panel screen down.

    • Identify the cameras at the top center.

  5. Find the front camera. Follow the gold strip to where it connects to the device. There is a black piece that is holding the gold strip. Flip this up to release the camera.
    • Find the front camera.

    • Follow the gold strip to where it connects to the device.

    • There is a black piece that is holding the gold strip. Flip this up to release the camera.

    • Follow bullets above for the rear facing camera.

  6. Insert new camera into each slot, make connections, and close the black flap. Snap back panel back onto the back of the screen.
    • Insert new camera into each slot, make connections, and close the black flap.

    • Snap back panel back onto the back of the screen.

    • Put screen and the keyboard back together.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jenna Hummer

Member since: 09/08/2017

112 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 75