Introduction

This guide will tell you how to replace the motherboard in the Neutab N9.

Turn off your device before beginning these steps.
  • Turn off your device before beginning these steps.

  • Insert the plastic opening tool into the seam between the screen and the back of the tablet. Move the opening tool along the seam until the back of the tablet releases.

Add Comment

Use the soldering gun to separate all soldered wires from the motherboard.
  • Use the soldering gun to separate all soldered wires from the motherboard.

  • For a complete guide on how to solder, click here.

Add Comment

  • Use a spudger to carefully release the tabs on the three ZIF connectors securing the ribbon cables to the motherboard.

  • Carefully pull the ribbons out.

Add Comment

  • Use the Phillips #J0 Screwdriver to remove the three 1mm screws from the motherboard

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 7

All Time: 46