Nerf Zombie Strike Crossbow Trigger Spring Replacement - iFixit Repair Guide

Introduction

There are some instances when the spring which allows a person to fire a Nerf crossbow breaks. One you have opened up the Nerf crossbow you will be able to tell whether or not the spring has broken. If in fact you are dealing with a broken swing then you are in luck since it can be replaced.

What you need

Step 1 Trigger Spring

Nerf Zombie Strike Crossbow Trigger Spring Replacement, Trigger Spring: step 1, image 1 of 1

There are 19 1.0 cm screws in total.

Step 2

Nerf Zombie Strike Crossbow Trigger Spring Replacement: step 2, image 1 of 1

Separate each part of the Nerf crossbow.

Step 3

Nerf Zombie Strike Crossbow Trigger Spring Replacement: step 3, image 1 of 1

Use the screwdriver and unscrew each screw one-by-one placing each screw on the magnetic mat to insure they do not get lost.

Step 4

Nerf Zombie Strike Crossbow Trigger Spring Replacement: step 4, image 1 of 1

Take the broken spring off of the trigger.

Step 5

Nerf Zombie Strike Crossbow Trigger Spring Replacement: step 5, image 1 of 1

Replace it with the new spring you bought at your local hardware store.

Step 6

Nerf Zombie Strike Crossbow Trigger Spring Replacement: step 6, image 1 of 1

Now that the spring has been reattached to the trigger repeat step two.
Finish by performing steps two and three in reverse order.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 1 other contributor

Benjamin Bucklin

Member since: 10/09/14

61 Reputation

3 Guides authored

Team

University of Maine, Team 1-12, Diaz Fall 2014 Member of University of Maine, Team 1-12, Diaz Fall 2014

UMAINE-DIAZ-F14S1G12

3 Members

3 Guides authored

One Comment

how do you get the arms/wings off without damaging the lock on clip?

Coventeena - Mar 12, 2015 Reply

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 3,593