Fix Your Stuff Community Store

Nerf Vortex Vigilon Slide Replacement

Introduction

In two steps, this guide will show you how to remove the slide pieces with a screwdriver so that they can be replaced.

What you need

  1. Nerf Vortex Vigilon Slide Replacement, Removing the slide screws: step 1, image 1 of 1

    • The two slide pieces hold the orange sight in place. Expect that the sight will come off when you remove the slide pieces.

    • Using a screwdriver, carefully unscrew the three #00 1 cm Phillips screws holding the two slide pieces together.

    • Both sides of the slide will come off when the screws are removed.

    Edit

  3. Nerf Vortex Vigilon Slide Replacement, Removing the slide pieces: step 2, image 1 of 1

    • Lift both slide pieces off of the gun.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Author

with 2 other contributors

Cara Pew

Member since: 09/29/14

911 Reputation

7 Guides authored

Badges: 17

+14 more badges

Team

Cal Poly, Team 13-6, Forte Fall 2014 Member of Cal Poly, Team 13-6, Forte Fall 2014

CPSU-FORTE-F14S13G6

5 Members

7 Guides authored

One Comment

Ok so the slide is removed now what? It's still stuck

amanintights1981 - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 7

All Time: 2,237