What you need
-
-
Unscrew all screws in the blue and gray area.
-
Remove the blue and gray part.
-
-
-
Unscrew all 3 screws holding down the white trigger cover (the trigger guard may be a different color).
-
Remove the trigger cover.
-
This image shows a Surgefire in working condition.
-
-
-
-
Here you can see how it looks when the trigger won't operate:
-
An "intermediate piece" is not in the right place or has fallen off.
-
Place the "intermediate piece" in the correct position (see photo 2).
-
Do not be surprised if the "intermediate piece" slides up a little. It is pressed down when the trigger guard is screwed back on.
-
In picture 3, you can see what it looks like when the part is in the correct place.
-
Follow the steps in reverse order to reassemble your device.
Follow the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›