Fix Your Stuff Community Store

Neato Botvac D8000 Battery Replacement

Introduction

Follow these steps to remove or replace a dead battery from your Neato Botvac D8000.

What you need

  1. Neato Botvac D8000 Battery Replacement, Battery: step 1, image 1 of 2 Neato Botvac D8000 Battery Replacement, Battery: step 1, image 2 of 2

    • Turn the robot upside down to locate the battery cover.

    Edit

  3. Neato Botvac D8000 Battery Replacement: step 2, image 1 of 3 Neato Botvac D8000 Battery Replacement: step 2, image 2 of 3 Neato Botvac D8000 Battery Replacement: step 2, image 3 of 3

    • Use a Phillips #1 screwdriver to unscrew both of the 20mm screws.

    • Gently lift the battery cover.

    • Remove the battery cover to reveal the battery.

    Edit

  4. Neato Botvac D8000 Battery Replacement: step 3, image 1 of 3 Neato Botvac D8000 Battery Replacement: step 3, image 2 of 3 Neato Botvac D8000 Battery Replacement: step 3, image 3 of 3

    • Use a flathead screwdriver to push down on the latch of the battery clip.

    • Simultaneously, pull on the battery while pushing down on the latch to detach the battery from the clip.

    • Do not pull on the wires that are connected to the battery.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 1 other contributor

Michelle Sanchez

Member since: 03/22/18

174 Reputation

1 Guide authored

Badges: 5

+2 more badges

Team

Sam Houston State, Team S17-G6, Blackburne Spring 2018 Member of Sam Houston State, Team S17-G6, Blackburne Spring 2018

SHSU-BLACKBURNE-S18S17G6

4 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 4

All Time: 805