Fix Your Stuff Community Store

Neato Botvac 80 Rear Bumper Replacement

Introduction

This is a prerequisite guide to remove the rear bumper. Most repairs/ replacements will require you to remove the bumper and this guide will help you out.

  1. Neato Botvac 80 Rear Bumper Replacement, Rear Bumper: step 1, image 1 of 1

    • Grab the rear bumper with both hands on either side.

    Edit

  3. Neato Botvac 80 Rear Bumper Replacement: step 2, image 1 of 1

    • Pull the left and right sides away from the machine to unclip the bumper. This requires that you bend the plastic a little bit. Unclip one side a little bit and allow the prong to rest on the side of the machine. Then unclip the other side and pull off the bumper parallel to both sides

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 3 other contributors

Brandon Blank

Member since: 02/02/17

675 Reputation

5 Guides authored

Badges: 11

+8 more badges

Team

USF Tampa, Team 17-5, Blackwell Spring 2017 Member of USF Tampa, Team 17-5, Blackwell Spring 2017

USFT-BLACKWELL-S17S17G5

3 Members

12 Guides authored

One Comment

Is the rear bumper a single piece that is both upper and lower part joined?

Sanjukta - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 1,434