Parts

No parts required.

  1. Insert spudger into the USB Micro slot and pry the case apart.
    • Insert spudger into the USB Micro slot and pry the case apart.

    • Be careful not to go too deep and bend the prong inside the Micro USB port.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger.
    • Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger.

    • Gently separate the case so none of the cords inside are disconnected

    Add Comment

    • After prying the device apart, it should look like this.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Austin Oliveira

Member since: 02/05/2015

204 Reputation

2 Guides authored

Team

UW Tacoma, Team 3-6, Rose Winter 2015 Member of UW Tacoma, Team 3-6, Rose Winter 2015

UWT-ROSE-W15S3G6

3 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 82