Introduction

Replacement of the TF6's dust cover is necessary when it is cracked or broken. Replacement dust covers can be obtained from any Mr. Coffee TF series coffeemaker or online at Mr. Coffee's website.

Tools

No tools required.

Parts

Image 1/2: Image 2/2:
  • Facing the front of the TF6, gently lift the dust cover along its hinge until it reaches its designed stopping point.

Add Comment

Image 1/2: Do not push the retaining bracket beyond its designed range of motion. It may snap if too much force is applied outside its limit. Image 2/2: Do not push the retaining bracket beyond its designed range of motion. It may snap if too much force is applied outside its limit.
  • Orient the retaining bracket upwards (away from the main body of unit).

  • Do not push the retaining bracket beyond its designed range of motion. It may snap if too much force is applied outside its limit.

Add Comment

Image 1/1:
  • With the retaining clip in its released position, pull the spout down towards the filter basket.

Add Comment

Image 1/2: Extra force may be required to disengage the dust cover's locking pins. Refrain from applying excessive upward force on the dust cover, as dong so may cause the pins to snap under pressure. Image 2/2: Extra force may be required to disengage the dust cover's locking pins. Refrain from applying excessive upward force on the dust cover, as dong so may cause the pins to snap under pressure.
  • Carefully detach the dust cover by disengaging the locking pins, starting at one side.

  • Extra force may be required to disengage the dust cover's locking pins. Refrain from applying excessive upward force on the dust cover, as dong so may cause the pins to snap under pressure.

Add Comment

Conclusion

Follow these steps in reverse order with a new Dust Cover.

Jordan

Member since: 01/31/2014

201 Reputation

2 Guides authored

Team

Cal Poly, Team 13-18, Regan Winter 2014 Member of Cal Poly, Team 13-18, Regan Winter 2014

CPSU-REGAN-W14S13G18

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 225