Use a Phillips #1 screwdriver to remove the two 9mm screws and the three 11mm screws on the bottom of the coffee maker and remove the bottom plastic cover. Use a Phillips #1 screwdriver to remove the two 9mm screws and the three 11mm screws on the bottom of the coffee maker and remove the bottom plastic cover. Use a Phillips #1 screwdriver to remove the two 9mm screws and the three 11mm screws on the bottom of the coffee maker and remove the bottom plastic cover.
  • Use a Phillips #1 screwdriver to remove the two 9mm screws and the three 11mm screws on the bottom of the coffee maker and remove the bottom plastic cover.

Add Comment

Slide display out of the way.
  • Slide display out of the way.

Add Comment

Using a Phillips #1 screwdriver, remove 12mm screws from heating element bracket and remove bracket. Using a Phillips #1 screwdriver, remove 12mm screws from heating element bracket and remove bracket. Using a Phillips #1 screwdriver, remove 12mm screws from heating element bracket and remove bracket.
  • Using a Phillips #1 screwdriver, remove 12mm screws from heating element bracket and remove bracket.

Add Comment

Pull heating element out of the way.
  • Pull heating element out of the way.

Add Comment

Twist warming plate clockwise so that the tab is out of place. Remove warming plate.
  • Twist warming plate clockwise so that the tab is out of place. Remove warming plate.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michael Chhim

Member since: 03/21/2017

202 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 2

Past 30 Days: 5

All Time: 49