Image 1/2: Image 2/2:
  • Press the release button located on the upper edge of the battery cover. At the same time, lift the battery cover away from the phone.

Add Comment

Image 1/2: Image 2/2:
  • Push the top edge of the battery and lift away from the phone.

Add Comment

Image 1/2: The phone may have rubber plugs covering the screws of the inside screen. If so, remove the rubber plugs with a thin metal needle. Image 2/2: The phone may have rubber plugs covering the screws of the inside screen. If so, remove the rubber plugs with a thin metal needle.
  • Remove the 4 screws on the corners of the inside screen with the T4 screwdriver

  • The phone may have rubber plugs covering the screws of the inside screen. If so, remove the rubber plugs with a thin metal needle.

Add Comment

Image 1/1: Use care when doing this step because you don’t want the external shell or the pieces inside the phone to break.
  • Use a plastic opening tool to pry the external shell off of the phone.

  • Use care when doing this step because you don’t want the external shell or the pieces inside the phone to break.

Add Comment

Image 1/1:
  • Remove the two side buttons with tweezers.

Add Comment

Image 1/1:
  • Use tweezers to remove the circular magnetic ring covering the camera.

Add Comment

Image 1/2: You may choose to use tweezers to remove the screen instead. Image 2/2: You may choose to use tweezers to remove the screen instead.
  • Use a spudger to pry the screen from the inside front part of the phone.

  • You may choose to use tweezers to remove the screen instead.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Daniel Simcock

Member since: 10/24/2015

601 Reputation

6 Guides authored

Team

UMass Dartmouth, Team 3-2, Shastany Fall 2015 Member of UMass Dartmouth, Team 3-2, Shastany Fall 2015

UMASSD-SHASTANY-F15S3G2

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 93