Skip to main content

Motorola Razr V3c Face-Screen Replacement

Archived Guide
This guide is retained solely for historical purposes. Use the updated version of the guide to perform your repair.

What you need

  1. Motorola Razr V3c Face-Screen Replacement, Face-Screen: step 1, image 1 of 1
    • Clear a table or desk to use as a workspace. You will need a container to place small screws as they will be used in reassembly.

  2. Motorola Razr V3c Face-Screen Replacement: step 2, image 1 of 1
    • Open the phone's face.

  3. Motorola Razr V3c Face-Screen Replacement: step 3, image 1 of 1
    • Unscrew the four screws located around the face plate using a 1.5mm Hex tool.

  4. Motorola Razr V3c Face-Screen Replacement: step 4, image 1 of 1
    • After removing the screws, use a flat surfaced tool to take the face-screen off.

  5. Motorola Razr V3c Face-Screen Replacement: step 5, image 1 of 1
    • Use this step as a checkpoint. Once the face-screen cover is off, the workspace should resemble this step’s picture.

  6. Motorola Razr V3c Face-Screen Replacement: step 6, image 1 of 1
    • Carefully remove the face-screen using your fingers.

  7. Motorola Razr V3c Face-Screen Replacement: step 7, image 1 of 1
    • You may now carefully install a functioning face-screen.

  8. Motorola Razr V3c Face-Screen Replacement: step 8, image 1 of 1
    • After securing the face-screen into the casing, place the face screen cover back on.

  9. Motorola Razr V3c Face-Screen Replacement: step 9, image 1 of 1
    • Screw in the four corner screws. After completion of this step, your phone should function properly. Enjoy!

Conclusion

Enjoy your newly inserted face-screen.

Nigel

Member since: 09/06/11

133 Reputation

2 Guides authored

Team

Cuesta, Team 1-5, Zipperian Fall 2011 Member of Cuesta, Team 1-5, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G5

1 Member

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 2,818