Motorola Razr V3 Camera Replacement

Step 1 Battery



• Remove the back cover by pressing down the silver button.
• Pull the cover away from the phone.
Step 2



• Remove the battery by pushing down on the top and pulling it away from the phone.
Step 3 Upper Casing
• Use tweezers to pry off the four rubber screw covers from the inside face.
• Our phone is missing the two left screw covers, be careful not to lose yours too!
Step 4
• Remove the four T5 Torx screws that were underneath the rubber covers.
Step 5
• Use the plastic opening tool to pry the top cover away from the phone.
• The side buttons on the phone may fall out when the top cover is separated from the phone. They can easily be put back by placing them in their original spot.
Step 6 Camera
• Use tweezers to flip up the ZIF tab on the camera ribbon cable socket.
• Gently pull the camera ribbon cable out of the ZIF socket.
Step 7
• Using a pair of tweezers gently grab and remove the camera from the phone.

Author

with 8 other contributors

Christian

Member since: 04/18/13

224 Reputation

2 Guides authored

Badges: 12

• 
• 
• 

+9 more badges

Team

Cal Poly, Team 3-46, Amido Spring 2013 Member of Cal Poly, Team 3-46, Amido Spring 2013

CPSU-AMIDO-S13S3G46

4 Members

8 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview